環氧地坪漆的耐磨性是指漆膜干燥后，對摩擦作用的抵抗能力，即遇機械損傷時，堅持漆膜性能的一種能力。耐磨是環氧地坪漆的一個重要特點，那么如何增加環氧地坪漆的耐磨性呢?一般來說可以通過增加環氧地坪漆涂層厚度、表面涂罩光漆和打蠟來提高環氧地坪漆的耐磨性能。

The abrasion resistance of epoxy floor paint refers to the resistance to friction of the film after drying, that is, the ability to adhere to the film performance in case of mechanical damage. Wear resistance is an important characteristic of epoxy floor paint, so how to increase the wear resistance of epoxy floor paint? Generally speaking, the wear resistance of epoxy floor paint can be improved by increasing the coating thickness, surface varnish and wax.

1、增加厚度

1. Increasing Thickness

許多消費者為了節約成本，一般都會選擇一遍底漆兩遍面漆的環氧薄涂環氧地坪，厚度通常只有0.3-0.5mm，這種環氧地坪的耐磨性能就比較差，可以通過刮涂中涂砂漿層和中涂膩?zhàn)訉觼?lái)增加環氧地坪漆的厚度，這樣不僅能增加環氧地坪漆的耐磨性能，還能增加環氧地坪漆的抗壓性能。推薦閱讀：《環氧地坪漆是否涂層越厚越好》

In order to save cost, many consumers usually choose the epoxy floor with one primer and two topcoats. The thickness of the epoxy floor is usually only 0.3-0.5mm. The wear resistance of the epoxy floor is poor. The thickness of the epoxy floor paint can be increased by scraping the mortar layer and middle putty layer. This can not only increase the wear resistance of the epoxy floor paint, but also increase the epoxy floor paint. Compressive properties. Recommended reading: Whether the Thicker the Epoxy Floor Paint is, the Better

2、表面涂罩光漆

2. Surface coating varnish

在環氧環氧地坪漆完工后，通過在表面滾一遍聚氨酯清漆的方法，不僅可以形成平滑光亮的涂膜，提高環氧地坪的光澤度，使漆膜更加光亮美觀，還可以提高環氧地坪漆的耐磨性。

After finishing the epoxy floor paint, by rolling the polyurethane varnish over the surface, not only the smooth and bright film can be formed, the gloss of the epoxy floor paint can be improved, the film can be more bright and beautiful, but also the wear resistance of the epoxy floor paint can be improved.

3、打蠟

3. Waxing

環氧地坪漆表面定期打蠟，可以對環氧地坪漆起到保護作用，因?yàn)橄灻姹容^硬，可以有效的阻止室外帶進室內的細沙礫對地面的研磨、隔絕黑鞋印和輪胎印對地面的污染、防止硬物對地面的刻劃。

Regular waxing on the surface of epoxy floor paint can protect the epoxy floor paint, because the surface of the wax is hard, which can effectively prevent the grinding of the ground by fine gravel brought into the room outdoors, prevent the pollution of the ground caused by the black shoes and tire prints, and prevent the sculpture of the ground by hard objects.

環氧地坪漆施工

Construction of Epoxy Floor Paint

環氧地坪漆耐磨性能測試方法：

Test methods for abrasion resistance of epoxy floor paint:

1、將環氧地坪漆涂在在專用圓形玻璃板上。

1. Apply epoxy floor paint on special round glass panels.

2、將試板固定在耐磨儀的工作盤上，加壓臂上加上規定的載重，放下吸塵嘴，并調節至樣板1-1.5mm。

2. Fix the test plate on the working plate of the wear-resisting tester, add the specified load on the pressure arm, put down the vacuum nozzle, and adjust it to the sample board 1-1.5mm.

3、開動開關，把樣板先磨50r(圈)，使之形成較平整的表面。

3. Turn on the switch and grind the sample for 50R (circle) to form a smooth surface.

4、用毛筆輕輕抹去浮屑，第一次稱重。

4. Use a brush to gently wipe off debris and weigh it for the first time.

5、按產品標準規定調整計數器進行試驗。當達到規定的耐磨轉數時，即行停止。

5. Adjust the counter according to the product standard. When the specified wear-resisting speed is reached, it will stop.

6、取出樣板，抹去浮屑，第二次稱重。前后質量之差，即為漆膜失重。要求平行試驗兩次，每次所得值誤差不大于7%，結果取平均值。比如：環氧砂漿地坪對耐磨性能的要求是：在臂重砝碼750g，耐磨500r,前后漆膜質量之差不大于0.02g。