當前位置：首頁 > 技術知識 > 環氧地坪漆施工如何避免出現【膩?zhàn)庸魏邸浚?/div>
環氧地坪漆施工如何避免出現【膩?zhàn)庸魏邸浚?/h1>
環氧地坪漆施工如何避免出現【膩?zhàn)庸魏邸浚?/h1>
來源：
瀏覽：302
發布日期：2019-7-31 9:21:50
膩?zhàn)庸魏凼侵?a title="環氧地坪漆" target="_blank" >環氧地坪漆涂料涂層表面刮過膩?zhàn)拥牟糠之a(chǎn)生殘痕或失光現象，而環氧地坪漆的工序主要?jiǎng)澐职ǖ灼釋印⑸皾{層、膩?zhàn)訉雍兔嫫釋?，因?yàn)?a title="環氧地坪" target="_blank" >環氧地坪漆膩?zhàn)訉邮亲罱咏嫫岬囊粚?，而面漆層又非常的薄，這就產生了如果膩?zhàn)訉釉谂问┕r(shí)留下了痕跡，輥涂面漆后，從而使整個環氧地坪工程都將存在刮痕。讓施工和打磨都比較費力。因?yàn)槟退佔虞^結實， 產品膠性大，攪拌和批刮時要比非耐水膩?zhàn)永щy。耐水膩?zhàn)拥膹?qiáng)度也要比非耐水膩?zhàn)痈?，打磨時也會比較費力。如果環氧地坪漆工程出現大量刮痕，將會嚴重影響環氧地坪的表光效果。并且會導致環氧地坪的摩擦系數提升，將導致無法達到前期商定的要求。因此如何避免出現膩?zhàn)訉庸魏凼欠浅Ｓ斜匾摹?/p>
Putty scratch refers to the phenomenon that the part of the epoxy floor paint surface scratched over the putty produces residual marks or loss of gloss, while the process of epoxy floor paint mainly includes primer layer, mortar layer, putty layer and topcoat layer, because the putty layer of epoxy floor paint is the closest to topcoat layer, and the topcoat layer is very thin, which results in this phenomenon. If the putty layer leaves traces during batch scraping construction, the scratches will exist in the whole epoxy flooring project after roller coating. Make construction and grinding more laborious. Because the water-resistant putty is stronger and the product is more gelatinous, it is more difficult to mix and scrape than the non-water-resistant putty. The strength of water-resistant putty is also higher than that of non-water-resistant putty, and it will be more laborious when polishing. If there are a lot of scratches in the epoxy floor paint project, it will seriously affect the gloss effect of the epoxy floor paint. The friction coefficient of epoxy flooring will be increased, which will lead to the failure to meet the agreed requirements. Therefore, how to avoid the appearance of putty scratches is very necessary. 環氧環氧地坪漆膩?zhàn)庸魏郛a(chǎn)生的原因：
Causes of Scratch on Putty of Epoxy Floor Paint:
1、刮涂膩?zhàn)硬课晃赐糠忾]底漆，膩?zhàn)訉拥奈土看?
1. Scraping putty parts without sealing primer, putty layer has a large oil absorption;
2、所使用膩?zhàn)拥氖湛s性大，固化后容易變形，產生膩?zhàn)託埡邸?/p>
2. The putty used has large shrinkage and is easy to deform after curing, resulting in putty residue.
3、涂刮膩?zhàn)訉硬糠执蚰ゲ蛔悖霈F(xiàn)凹凸，不平整現象，沒有經過處理直接施工環氧面漆;
3. Lack of polishing, concave and convex, uneven phenomena appeared in the coated putty layer, and epoxy topcoat was directly constructed without treatment.
膩?zhàn)庸魏?/p>
Putty Scratch
有效避免環氧環氧地坪漆膩?zhàn)庸魏鄣姆椒ǎ?/p>
Effective methods to avoid scratches on putty of epoxy floor paint:
1、由于收縮性大，造成的膩?zhàn)託埡?，?yīng)選擇使用配套的膩?zhàn)舆M(jìn)行刮涂;
1. Because of the large shrinkage, the putty residue should be scraped with matching putty.
2、避免產生膩?zhàn)託埡?，建議對涂刮的膩?zhàn)訉映浞执蚰?，光亮、平滑后，再進行環氧面漆施工;
2. To avoid putty residue, it is suggested that the coated putty layer should be polished sufficiently, and then epoxy finish should be applied after it is bright and smooth.
3、由于底漆封閉層，封閉性不強，膩?zhàn)訉游土窟^(guò)大，我們應該在刮涂膩?zhàn)訉忧八⑼糠忾]底漆，做好基層處理。
3. Because the sealing layer of the primer is not strong and the oil absorption of the putty layer is too large, we should brush the sealing primer before scraping the putty layer, and do a good job of grass-roots treatment.
評論
-
管理員剛剛
暫無任何留言！
來源：
瀏覽：302
發布日期：2019-7-31 9:21:50
膩?zhàn)庸魏凼侵?a title="環氧地坪漆" target="_blank" >環氧地坪漆涂料涂層表面刮過膩?zhàn)拥牟糠之a(chǎn)生殘痕或失光現象，而環氧地坪漆的工序主要?jiǎng)澐职ǖ灼釋印⑸皾{層、膩?zhàn)訉雍兔嫫釋?，因?yàn)?a title="環氧地坪" target="_blank" >環氧地坪漆膩?zhàn)訉邮亲罱咏嫫岬囊粚?，而面漆層又非常的薄，這就產生了如果膩?zhàn)訉釉谂问┕r(shí)留下了痕跡，輥涂面漆后，從而使整個環氧地坪工程都將存在刮痕。讓施工和打磨都比較費力。因?yàn)槟退佔虞^結實， 產品膠性大，攪拌和批刮時要比非耐水膩?zhàn)永щy。耐水膩?zhàn)拥膹?qiáng)度也要比非耐水膩?zhàn)痈?，打磨時也會比較費力。如果環氧地坪漆工程出現大量刮痕，將會嚴重影響環氧地坪的表光效果。并且會導致環氧地坪的摩擦系數提升，將導致無法達到前期商定的要求。因此如何避免出現膩?zhàn)訉庸魏凼欠浅Ｓ斜匾摹?/p>
Putty scratch refers to the phenomenon that the part of the epoxy floor paint surface scratched over the putty produces residual marks or loss of gloss, while the process of epoxy floor paint mainly includes primer layer, mortar layer, putty layer and topcoat layer, because the putty layer of epoxy floor paint is the closest to topcoat layer, and the topcoat layer is very thin, which results in this phenomenon. If the putty layer leaves traces during batch scraping construction, the scratches will exist in the whole epoxy flooring project after roller coating. Make construction and grinding more laborious. Because the water-resistant putty is stronger and the product is more gelatinous, it is more difficult to mix and scrape than the non-water-resistant putty. The strength of water-resistant putty is also higher than that of non-water-resistant putty, and it will be more laborious when polishing. If there are a lot of scratches in the epoxy floor paint project, it will seriously affect the gloss effect of the epoxy floor paint. The friction coefficient of epoxy flooring will be increased, which will lead to the failure to meet the agreed requirements. Therefore, how to avoid the appearance of putty scratches is very necessary. 環氧環氧地坪漆膩?zhàn)庸魏郛a(chǎn)生的原因：
Causes of Scratch on Putty of Epoxy Floor Paint:
1、刮涂膩?zhàn)硬课晃赐糠忾]底漆，膩?zhàn)訉拥奈土看?
1. Scraping putty parts without sealing primer, putty layer has a large oil absorption;
2、所使用膩?zhàn)拥氖湛s性大，固化后容易變形，產生膩?zhàn)託埡邸?/p>
2. The putty used has large shrinkage and is easy to deform after curing, resulting in putty residue.
3、涂刮膩?zhàn)訉硬糠执蚰ゲ蛔悖霈F(xiàn)凹凸，不平整現象，沒有經過處理直接施工環氧面漆;
3. Lack of polishing, concave and convex, uneven phenomena appeared in the coated putty layer, and epoxy topcoat was directly constructed without treatment.
膩?zhàn)庸魏?/p>
Putty Scratch
有效避免環氧環氧地坪漆膩?zhàn)庸魏鄣姆椒ǎ?/p>
Effective methods to avoid scratches on putty of epoxy floor paint:
1、由于收縮性大，造成的膩?zhàn)託埡?，?yīng)選擇使用配套的膩?zhàn)舆M(jìn)行刮涂;
1. Because of the large shrinkage, the putty residue should be scraped with matching putty.
2、避免產生膩?zhàn)託埡?，建議對涂刮的膩?zhàn)訉映浞执蚰?，光亮、平滑后，再進行環氧面漆施工;
2. To avoid putty residue, it is suggested that the coated putty layer should be polished sufficiently, and then epoxy finish should be applied after it is bright and smooth.
3、由于底漆封閉層，封閉性不強，膩?zhàn)訉游土窟^(guò)大，我們應該在刮涂膩?zhàn)訉忧八⑼糠忾]底漆，做好基層處理。
3. Because the sealing layer of the primer is not strong and the oil absorption of the putty layer is too large, we should brush the sealing primer before scraping the putty layer, and do a good job of grass-roots treatment.
評論
-
管理員剛剛
暫無任何留言！
技術知識Classification
聯系我們
Contact Us
- 無錫龍鼎地坪科技有限公司
- 電 話:0510-88585862
- 聯系人:范經理
- 手 機:139-2116-5688
- 郵 箱:wxlddp@126.com
- 地 址:無錫市新區梅村工業園區
關于我們 主營產品 新聞動態 工程案例 技術知識 銷售網絡 聯系我們
無錫龍鼎地坪科技有限公司
電話：技術顧問（181-1888-6662）
郵箱：wxlddp@126.com
聯系人：范經理(139-2116-5688)
公司地址：無錫市新區梅村工業園區
蘇ICP備18008698號網站版權注冊 仿冒必究!
關注微信
進入手機官網