天天做日日做_在线国产美女精品肥臀99_免费视频女人a级毛片_亚洲中文久久精品无码_亚洲国产乱子伦视频网站_亚洲顶级AV片一区二区_国产日韩视频在线观看网址_成年人的午夜影院在线_欧美成人午夜福利图片!_月夜直播下载

歡迎光臨無錫龍鼎地坪科技有限公司官網! 收藏本站/在線留言/網站地圖

無錫龍鼎地坪科技有限公司

龍鼎地坪全天24小時竭誠為您服務!139-2116-5688

當前位置:首頁 > 技術知識 > 地坪漆廠家為何要控制環氧地坪施工厚度

地坪漆廠家為何要控制環氧地坪施工厚度

返回列表 來源: 瀏覽:150 發布日期:2019-6-1 20:33:38

對于做過環氧地坪漆的消費者應該都會有這樣的經歷,在向環氧地坪漆廠家咨詢時會被問到打算做幾遍、做多厚,主要是因為環氧地坪漆厚度直接關系著整個地坪的使用壽命及使用效果。對于地坪漆廠家來說,在地坪漆施工過程中做好地坪漆涂層厚度的把控是做出高質量的環氧地坪的必經之路,更是衡量一個地坪漆廠家施工專業水平的關鍵組成部分。

Consumers who have done epoxy floor paint should have such experience. When consulting with floor paint manufacturers, they will be asked how many times they intend to do, mainly because the thickness of floor paint is directly related to the service life and use effect of the whole floor. For flooring paint manufacturers, it is the only way to make high quality epoxy flooring paint, and it is also the key component to measure the professional level of a flooring paint manufacturer. 

按照標準的環氧地坪漆施工工藝來說,環氧地坪涂層主要分三個涂層:底涂層、中涂層、面涂層,環氧地坪漆材料的用量主要根據基礎地面狀況、施工工藝、工程厚度來計算。以最常用的混凝土水泥基礎地面來說,底漆的用量基本在0.15kg/平方,如果水泥基礎地面的強度差,沒達到C25以上,有起砂、起粉現象,地面有凹凸不平的現象,環氧底漆的用量也會增加。中涂層的用量基本為0.35kg/平方,該層的作用是用來找平地面、增加厚度的,如果工程的厚度增加,相應材料用量也會跟著增加。面涂層用量基本固定(薄涂面漆用量為0.2kg/平方,自流平面漆用量為1kg/平方)。

According to the standard construction technology of epoxy floor paint, the epoxy floor coating is mainly divided into three coatings: primer coating, intermediate coating and surface coating. The amount of epoxy floor paint material is mainly calculated according to the basic ground condition, construction technology and engineering thickness. For the most commonly used concrete cement foundation floors, the amount of primer is basically 0.15kg/square. If the strength of cement foundation floors is not good enough to reach C25 or above, there will be sand and powder, and the floors will be uneven, the amount of epoxy primer will also increase. The amount of middle coating is 0.35 kg/square. The function of this layer is to leveling the ground and increasing the thickness. If the thickness of the project increases, the corresponding amount of material will also increase. The amount of surface coating is basically fixed (0.2 kg/square for thin coatings and 1 kg/square for self-flowing coatings).


評論

  • 管理員剛剛

    暫無任何留言!

技術知識Classification

聯系我們
Contact Us

  • 無錫龍鼎地坪科技有限公司
  • 電 話:0510-88585862
  • 聯系人:范經理
  • 手 機:139-2116-5688
  • 郵 箱:wxlddp@126.com
  • 地 址:無錫市新區梅村工業園區