隨著人們對工業廠房的重視，很多人們都紛紛開始采用環氧地坪漆作為地板的涂層涂料，但是如果后期不多加注意保養，后容易造成地板的使用壽命提前衰退、各個方面的性能也會老化。今天小編就為大家詳細介紹環氧地坪漆施工后該如何進行保養和養護。環氧地坪漆地面的十種施工解決辦法

With people's attention to industrial plants, many people have begun to use epoxy floor paint as floor coatings, but if not pay more attention to maintenance in the later period, it is easy to cause the service life of the floor decline in advance, all aspects of performance will also be aging. Today Xiaobian will give you details about how to maintain and maintain epoxy floor paint after construction. Ten construction solutions for epoxy floor paint floor

環氧環氧地坪漆施工完畢后需要7-10個小時的養護時間方可投入使用。在養護期間"應避免水或其他有機溶液浸潤環氧地坪表面，可根據地面要求"在有條件的情況下做打蠟保護可防止地面刮傷。凡進入車間的人員必須換鞋，不能穿硬度極強的膠底鞋、鐵塊底鞋和高跟鞋"應該避免將泥沙帶

The epoxy floor paint will need 7-10 hours' maintenance time after construction. During the maintenance period, "water or other organic solutions should be avoided to infiltrate the surface of the floor, according to the ground requirements" in the case of conditional paraffin protection can prevent ground scratches. Those who enter the workshop must change their shoes. They should not wear stiff rubber soles, iron soles and high heels. Sediment belts should be avoided.

入車間內，以免劃傷環氧環氧地坪漆表面。

In the workshop, so as not to scratch the surface of epoxy floor paint.

設備進廠前 "在地坪面上鋪上硬紙箱墊底再用木板鋪在上面"并用大膠輪的叉車給機械設備定位以免在運輸設備過程中壓爆或刮傷地坪表面。

Before entering the plant, the equipment "lays cardboard boxes on the floor and then boards on it" and uses forklift trucks with large rubber wheels to locate the mechanical equipment so as to avoid pressure explosion or scratch the surface of the floor during the transportation of the equipment.

地面如有粗硬砂粒、泥漿等應及時掃除干凈，以免砂粒碾磨損傷地面"使用工具時應該避免工具散落砸傷地面。

If the ground has coarse and hard sand, mud and so on should sweep clean promptly, in order to avoid the sand grinding abrasion damage ground "when using the tool, should avoid the tool scattering to hit the ground.

凡是硬腳件、如鐵椅、鐵桌、鐵貨架等必須將其腳用軟質塑料、橡膠包裹或用紙皮墊起來以免在使用過程中劃傷地坪表面。禁止在沉重貨物直接接觸地坪表面時硬行拖拽移動，運送重物時應使用多輪活腳板車、叉車、鏟車卸貨時注意貨物平放，避免貨物側倒時砸損、刮傷地面、車輛、叉車、鏟車運行時盡量避免剎車。

All hard feet, such as iron chairs, iron tables, iron shelves, etc. must be soft plastic, rubber wrapped or padded with paper to avoid scratching the surface of the floor during use. It is forbidden to drag and move heavy goods when they touch the surface of the floor. When carrying heavy goods, multi-wheel scooters, forklift trucks and forklift trucks should be used to unload the goods, so as to avoid damage, scratch the ground, vehicles, forklift trucks and forklift trucks when they are running.

在環氧地坪車間使用的推車、叉車的車輪應使用硬質或彈性膠輪"車間內外使用的推車、板車應有分別根據使用范圍區別分開使用。清潔地面時使用軟質、吸水性好的拖把或干濕兩用吸塵器"也可用清水、洗滌劑、肥皂水等用清洗機清洗。在沒有清洗機的情況下"可用鋸木粉撒上后再清掃干凈，千萬不能用強化學溶劑、如二甲苯、香蕉水等清洗。容易受到污染的區域"比較顯眼的門面、走廊應每天用寬布拖把清潔1-2次。

The wheels of carts and forklifts used in the epoxy floor workshop shall be made of hard or elastic rubber wheels. When cleaning the ground, use a soft, water-absorbing mop or a dry-wet dual-purpose vacuum cleaner "can also be cleaned with clean water, detergent, soap water and other cleaning machines. In the absence of a cleaning machine, "Sawn wood powder can be sprinkled and then swept clean, must not be used to strengthen the chemical solvent, such as xylene, banana water cleaning. The area that is easy to be polluted should be cleaned 1-2 times with a wide cloth mop every day.

滲油漏油的部位，用鋸末經常清潔，以免污油變性而吸附灰層成為頑固性污漬。大面積油浸的區域可用寬布拖把推動鋸末吸干地坪油份， 保持地面清潔無油污。

Oil leakage parts, often cleaned with sawdust, so as to avoid the deterioration of dirty oil and adsorbed ash layer into a stubborn stain. Wide cloth mops can be used to drive sawdust to absorb oil from the floor in large areas of oil immersion to keep the floor clean and oil-free.

因使用時間較長而造成的磨損或刮花，面積較小的可進行局部修補"若面積較大則建議重新滾涂1次。如有大的漆膜破損應及時報修，以便在油污滲入基礎之前進行修補作業。車間用水沖洗地面時"避免油水混合物沉積在環氧地坪漆上面深度破損處。

Wear or scratch caused by long service time, small area can be repaired locally. "If the area is large, it is recommended to roll again one time. If there is a large film damage, it should be repaired in time so as to repair the oil before infiltration. When the workshop flushing the floor with water, "avoid oil and water mixture deposited on the floor of epoxy floor.