環氧地坪施工的時候有很多需要注意的地方，環氧自流平地坪漆的施工工法和選料并沒有固定的標準，歐美、日本、韓國等各國的材料和施工習慣均有不同，在中國大陸這三種工法都有采用，但目前由于工程價格逐步降低，多層體系因其材料費用低在市場上占了主流。

There are many points needing attention in the construction of epoxy floor paint. There is no fixed standard for the construction method and material selection of epoxy self-leveling floor paint. The materials and construction habits of Europe, America, Japan, Korea and other countries are different. These three construction methods have been adopted in mainland China. However, due to the gradual reduction of the project price, more and more of them have been used. Tier systems dominate the market because of their low material costs.

封閉底漆和無溶劑環氧自流平面涂、石英砂封閉底漆多選用無溶劑型，滲透性和封閉性好;而這種無溶劑環氧樹脂地坪漆通常由環氧樹脂、固化劑、顏色和助劑等組成，不含或少含填料，而在現場將甲乙混合后，還須再加一定比例和粒度的石英砂(粉)配成鏝涂料漿，用鋸齒刮板鏝涂后，再用釘子輥筒輥壓表面消泡和助流平。

Sealing primer and solvent-free epoxy self-flowing surface coating, quartz sand sealing primer are mostly solvent-free, with good permeability and sealing; and this solvent-free epoxy resin floor paint is usually composed of epoxy resin, curing agent, color and additives, without or without fillers, and in the field will be mixed with a certain ratio of A to B. After dispensing with zigzag scraper, the surface of the coating paste is defoamed and leveled by roller pressing with nails.

因?yàn)槎纬尚?，所以這種工法在不平地面做薄的自流平時，需先對地面進行修補和找平，否則施工后平整度不佳;其次，封閉底漆一定要能保證完全封閉底材孔隙;三是釘子輥筒一定要用。主要特點：這種工法主要為外資環氧地坪涂料企業(特別是歐美企業)所采用或推薦，施工工序少，所需工期短，質量相對也好控制，但 耐磨地坪材料費用高(主要面涂用量大)，對平整度高的基材地面尤其適用。

Because of the secondary molding, so this method of working on uneven ground to do thin self-flow peacetime, the ground needs to be first repaired and leveled, otherwise the smoothness after construction is not good; secondly, the sealing primer must be able to ensure a complete closure of the substrate pores; thirdly, the nail roller must be used. Main features: This method is mainly adopted or recommended by foreign-funded floor coatings enterprises (especially European and American enterprises), less construction procedures, shorter construction period, relatively good quality control, but high cost of wear-resistant floor materials (the main surface coating amount is large), especially suitable for high flatness substrate floor.