現在很多人按照地板的時候,都會選擇環氧自流平地面,這是屬于大工程,需要很多方面的施工技術,怎樣判斷環氧自流平的質量以及環氧自流平地面做法有哪些,下面就來為大家詳細介紹下吧!怎么判斷環氧自流平地坪質量:1、環氧自流平地坪是一種無溶劑、自流平、粒子致密的厚漿型的地坪。它具有自動找平、耐磨、耐壓的性能特點和高潔凈、美觀的環境要求,近幾年來受到不少行業的 好評和應用。

Now many people will choose epoxy self-leveling floor according to the floor time, this is a large project, need a lot of construction technology, how to judge the quality of epoxy self-leveling and epoxy self-leveling floor practices, the following is to introduce in detail for you! How to judge the quality of epoxy self-leveling floor: 

1, the epoxy self leveling floor is a solvent-free, self leveling, dense particle thick flooring. It has the characteristics of automatic leveling, wear resistance, pressure resistance and high clean and beautiful environmental requirements. In recent years, it has been praised and applied by many industries.

2、環氧自流平的性能是無可挑剔的,但是由于施工技術和涂料本身的質量問題,導致自流平地坪的質量差異也非常顯著。下面從三個方面為大家介紹在驗 收時怎樣判斷環氧自流平的質量優劣。

2. The performance of epoxy self-leveling is impeccable, but the quality difference of self-leveling floor is very significant because of the quality problems of construction technology and coating itself. Here are three aspects to introduce how to judge the quality of epoxy self leveling during acceptance.

3、表面狀況環氧自流平地坪是一種表面平滑、美觀,具有優秀裝飾效果的一種地坪,所以在驗收的時候,要看清楚地坪表面是否平整、光亮可達鏡面效果,且不能含 有顆粒等雜物。

3. Surface condition Epoxy self-leveling floor is a kind of surface smooth, beautiful, with excellent decorative effect of a kind of floor, so in acceptance, to see clearly whether the surface of the flat, bright mirror effect, and can not contain particles and other impurities.

4、豐滿度豐滿度即是看地面的反光率是否能達到95%,是否夠飽滿。這個指標在以前是不受到重視的,但是隨著社會的進步和人們的要求逐漸提高,這一項指標也 漸漸變成了一項基本的技術要求。一般反射率達不到85%的都是不合格的。

4, fullness and fullness is to see whether the reflection rate of the ground can reach 95%, and whether it is full enough. This index was not taken seriously in the past, but with the progress of society and people's requirements gradually improved, this index has gradually become a basic technical requirements. Less than 85% of the total reflectance is unqualified.

5、硬度為了使地面有足夠的耐磨性,許多客戶都會要求地坪表面有一定的硬度。為了達到工業的使用要求,我們一般要求地坪的硬度大于2H。但是填料容易下沉的 自流平固化后的硬度并不是太高,所以要選填料不易下沉的為佳。

5. Hardness in order to make the ground have enough wear resistance, many customers will require the surface of the floor has a certain degree of hardness. In order to meet the requirements of industrial use, we generally require that the hardness of the floor is greater than 2H. But the hardness of the self-leveling solidified filler is not too high, so it is better to choose the filler which is not easy to sink.

環氧自流平

Epoxy self leveling

環氧自流平地面做法：

Epoxy self leveling ground practice:

(1)、施工人員將配料用容器和施工工具清洗干凈,置于指定地點,在以后的施工過程中,隨時配合,保證容器工具清潔、干燥、無油污、無固化殘?jiān)取?/p>

(1) The constructors clean the ingredients with containers and construction tools and place them in the designated place. During the later construction, they should cooperate with each other at any time to ensure that the containers and tools are clean, dry, free of oil pollution and solidified residue.

(2)、計量工將稱量好的樹脂底涂料放入攪拌容器中,并做好記錄用量,也應記錄當時的溫度、濕度,攪拌工預先攪拌好。

(2) Metrologists will weigh the good resin primer into the mixing container, and do a good job of recording dosage, should also record the temperature, humidity, mixer pre-mixing.

(3)、計量工按配合比準確稱量好固化劑,并放入攪拌容器中,同時將用量做好記錄,攪拌工繼續攪拌,至少攪拌3分鐘,以保證混合物均勻。

(3) Metrologists accurately weigh the curing agent according to the mixing ratio and put it into the mixing container. At the same time, the dosage is recorded. The mixer continues to mix for at least 3 minutes to ensure the uniformity of the mixture.

(4)、操作工將攪拌的混合物倒在施工區域內,用鏝刀涂直至均勻,不得有空鼓、氣泡等缺陷。

(4) Operators pour the mixture into the construction area and apply it with a trowel until it is uniform, and there must be no hollow or bubble defects.

(5)、在底涂未完成固化前不要開始涂表層,否則會起皺。

(5) do not begin to coat the surface before finishing the finish, otherwise it will wrinkle.

(6)、層間涂刷間隔時間視溫度而定,若超過7天,涂面須以軟毛刷或研磨機粗糙化,再涂表層以增加附著力。

(6) The interval between layers depends on the temperature, if more than 7 days, the surface should be roughened by soft brush or grinder, and then coated with surface layer to increase adhesion.

(7)、底漆保養時間為一般12小時后,確認硬化狀態,進行下一道涂抹工序。

(7) when the primer is maintained for 12 hours, confirm the hardening state and carry out the next smearing process.